FLOORCLEANZE REFILL – 1 GAL

$15.00

PROFESSIONAL STRENGTH, NON-TOXIC, WATERBORNE CLEANER FORMULATED FOR ALL WOOD FLOORS.

FEATURES:

  • 1 gal ready-to-use formula premixed at a ratio (1:10) for heavy cleaning.
  • Environmentally responsible.
  • Dries quickly, does not leave a residue, and will not dull your floor.
  • Safe on all coated wood floors.
  • Can be used with a microfiber flat mop.
  • Ships immediately – in stock.

WHY DOES FLOORCLEANZE WORK BETTER THAN OTHER HARDWOOD FLOOR CLEANERS?

FLOORCLEANZE contains agents that not only vigorously attack the dirty particles to remove them, but also agents that aid in a much faster and efficient drying process as well. Additionally these agents are all friendly to the environment and non toxic.

HOW TO USE:

STEP 1 – DRY CLEANING/DUSTING. Begin by removing all dust, dirt, and grit from your wood floor surface by tack, sweep, or vacuum. It’s important the floor is dust free before damp cleaning with FLOORCLEANZE™.

STEP 2 – DAMP CLEANING USING A MICROFIBER FLAT MOP. Your floor should be cleaned with FLOORCLEANZE™ at the end of each day, or as needed. Damp cleaning removes the sticky spills, penetrating soils, and removes any stubborn residues on your wood floors. Pour FLOORCLEANZE™ into a spray bottle. Spray onto floor in 5’ x 5’ sections and wipe using a flat mop with microfiber cleaning pad attachment, or microfiber towel. Follow these same steps until the entire wood floor is clean. DO NOT FLOOD THE FLOOR. If the microfiber cleaning pad becomes soiled it should be cleaned out in the sink to prevent streaking. Dirty floors may require you to repeat these steps if necessary. After the entire floor is cleaned wash the microfiber cleaning pad in clean water and allow to air dry. After several usages the microfiber cleaning pad should be laundered.

Allow the wood floors to dry 5-10 minutes before use.