Showing 41–60 of 116 results
-
POLYDEFENDER FINISH – 1 GAL
$45.00Add to cartPREMIUM QUALITY, OIL-MODIFIED POLYURETHANE GLOSS SPECIFICALLY FORMULATED FOR PROFESSIONAL USE ON MAPLE SPORT FLOORS.
Extremely tough, high build gloss with excellent chemical resistance. Protects against perspiration and routine cleaning. Light amber color that enhances the natural color of wood. Easy to maintain. Self-leveling. MFMA approved. Will adhere to most solvent-based and waterborne finishes after proper preperation, drying, and curing time. Meets federal and most states clean air quality standards. VOC does not exceed 450 grams per liter.
Ships immediately – in stock.
Recommended For: Basketball, Racquetball, Volleyball, Multi-Purpose, Stages, Aerobics, Dance Floors
Leveling: Excellent
Solids: 50%
V.O.C.: 450
Dry Time: 16-24 hour recoat
Cure Time: 50% after 24 hours; 90% after 72 hours; 100% after 2 weeks
Coverage Rate: 500 square feet per gallon
Application Tools: Heavy weight T-bar with lambswool or synthetic applicator
Sheen (60-degree): 90+
Packaging: 1 gallon
-
Add to cart
COURTDECAL™ PREP – 8 OUNCE SPRAYER
A professional cleaning solution used to prepare the surface of your basketball court floor prior to installation of vinyl floor graphics. It removes surface contaminates such as oily residues, perspiration, and grease to ensure your vinyl decal adheres properly. It can be used on floors with waterborne or oil-modified coatings. It will not damage your surface.
COURTDECAL™ PREP should also be used to clean your vinyl decal prior applying a coat of COURTDECAL™ GUARD – a non-slip, protective coating, which is required by the NCAA to keep your basketball surface consistent.
New NCAA Basketball Rules requires decals to be “of a consistent surface”: The NCAA Playing Rules Oversight Panel recently approved a rule change that requires temporary decals and logos placed on the court to be “of a consistent surface” as the rest of the floor.
-
Read more
A 22 INCH ILLUMINATED MOP THAT WAS INTRODUCED IN THE 2018 NBA PLAYOFFS BY THE CELTICS, WARRIORS, AND CAVALIERS.
INNOVATION – WORLDS FIRST PATENTED ILLUMINATED MOP
The PROMOP HYPER-LITE 22 is the worlds first illuminated mop! The perimeter of the Hyper-Lite mop is powered with a bright white industrial powered light strip that illuminates the floor surface. This is the same technology NASA uses inside their space craft. The light strip is powered by three AA batteries and can be turned on and off from the handle grip. When turned on, not only does it allow the user to easily identify wet spots on the floor much more easily, but it also gives the mop a hovering effect that everybody in the arena will notice.
WHY IS THE PROMOP HYPER-LITE BETTER
The base of the PROMOP Hyper-Lite 22 is molded using industrial strength polycarbonate resins. This means the base is virtually unbreakable. Due to its low weight and high impact resistance, polycarbonate is the dominant material for making automotive headlamp lenses and bullet-proof windows. Each Hyper-Lite base has a 1 year warranty.
PROMOP HYPER-LITE 22 SPECS
- 22 inch diameter round base that can be branded with your team logo and colors.
- Each base is digitally printed and laminated so your logo is protected from damaging chemicals and cleaning solutions.
- Your custom graphic has a 1/8 inch die-cut buffer around the edge that protects it from damage and peeling.
- 21 inch ribbed IllumiCore which holds all the technology – battery pack, wiring harness, and Hyper-Lites.
- The IllumiCore protects the Hyper-Lites from damage – completely encased and protected.
- Hyper-Lites are encased in a silicone shield and waterproof IP65.
- Powered by three AA batteries. Long-life technology. Approximately 48 hour battery life when left on continuously.
- The aluminum handle extends up to 6 feet and can also be customized with your team branding and colors.
- Each Hyper-Lite includes a highly absorbent microcleanze pad that attaches to the bottom-side of the base by Velcro. Each pad is washable up to 300 times!
- Additional Hyper-Lite pads can be purchased separately.
ABOUT THE MICROCLEANZE PADS
Microcleanze fabric pads picks up 10 times more dust, dirt, and grit compared to traditional cotton mop pads. Microcleanze fabric removes bacteria by more than 70% compared to traditional cotton pads. And microcleanze fabric reduces the usage of water on your floor because it holds six times it’s weight in fluid. Research has shown that mopping with microcleanze fabric reduces heavy lifting and problematic body positions that can contribute to back injuries.
EMAIL YOUR ARTWORK, LOGO, FONT
After you purchase the Hyper-Dri email your artwork to [email protected]. Please send your artwork file in vector format — vector artwork is typically an AI, EPS, or vector PDF file. If you don’t have a vector file we may be able to convert it for you. Most high-resolution raster image files may work including – JPEG, GIF, TIFF, PSD, and PNG.
-
COURTCRAFTER – DESKTOP COLLECTIBLES
$360.00 – $2,712.00Select optionsCOURTCRAFTER desktop collectibles are 6 inch x 3 inch mini basketball court replicas
A high quality, laminated, digital print of your basketball or volleyball court is mounted to 1/4 inch thick piece of laser cut maple plywood. Each desktop collectible includes the acrylic stand. These are customized mini courts to match your teams basketball court – including the logos and lettering styles.
The ultimate gift for basketball or volleyball teams, coaching staff, or administration. Sold in sets of 12. Upon approval of artwork your order will ship within 3-5 days.
Send us your logo and lettering styles and we’ll create a digital rendering for approval before your custom COURTCRAFTER desktop collectibles are created.
Email your artwork to [email protected]
-
CUSTOM PROMOP HANDLE
$45.00Add to cartPROMOP REPLACEMENT HANDLE
Aluminum telescoping handle that is customized with any solid color and/or your logo repeated. Replacement handle for any Promop 24, 36, 48 and all Hyper-Dri mops.
-
INNER HUB
$1.00Add to cartReplacement inner hub of the swivel assembly for all Hyper-Dri mops. Also the inner hub replacement for all 2016 and older Promop swivel assembly – Promop 24, Promop 36, and Promop 48.
-
LOCK DOWN
$5.00Add to cartReplacement lock down part for all 2016 and older Promop models – Promop 24, Promop 36, and Promop 48. The lock down replacement part goes underneath the Promop and is anchored by the swivel assembly (2016 and older) by two machine screws. Includes two (2) machine screws.
-
Add to cart
Promop replacement end cap. Fits Promop models – Promop 24, Promop 36, Promop 48. Includes two (2) black end caps.
-
HANDLE CLIP
$2.00Add to cart2017 Promop replacement handle clip. Used to prevent the Promop handle from twisting during use. Fits 2017 and newer Promop models – Promop 24, Promop 36, Promop 48.
-
Add to cart
Replacement swivel assembly for Promop 2017 and newer – Promop Classic 24, Promop Classic 36, and Promop Classic 48, Promop Hyper-Glide 36, Promop Hyper-Glide 48, Promop Hyper-Glide 60, and all Promop Hyper-Dri sweat mops. The black ABS assembly part attaches to the top of the Promop base. Includes twist lock coupler for tightening the handle to the frame.
-
Add to cart
2017 Promop replacement twist lock coupler that is used to tighten the handle to the base of the Promop. Fits 2017 and newer Promop models – Promop 24, Promop 36, Promop 48.
-
Add to cart
The PROMOP HYPER-DRI 22 AND HYPER-LITE 22 – MICROCLEANZE PAD REPLACEMENT
The Hyper-Dri Microcleanze pad is a high performance polyester/polyamide fabric that is used under the base of all Hyper-Dri mops to remove wet spots on your floor surface during competion. Microcleanze fabric can hold up to six times its weight in fluid. Picks up 10 times more dust, grit and dirt, and removes 70% more bacteria compared to cotton. Research has shown that mopping with Microcleanze fabric reduces heavy lifting and problematic body positions that can contribute to back injuries. Each Microcleanze pad can be washed up to 300 times. To wash your Microcleanze products follow the instructions on the care tag.
This pad is also used for the Hyper-Lite 22.
-
Add to cart
The PROMOP HYPER-DRI 18 & ECO-DRI 18 MICROCLEANZE PAD REPLACEMENT
The Hyper-Dri 18 / ECO-DRI 18 Microcleanze pad is a high performance polyester/polyamide fabric that is used under the base of all Hyper-Dri 18 & ECO-DRI 18 mops to remove wet spots on your floor surface during competion. Microcleanze fabric can hold up to six times its weight in fluid. Picks up 10 times more dust, grit and dirt, and removes 70% more bacteria compared to cotton. Research has shown that mopping with Microcleanze fabric reduces heavy lifting and problematic body positions that can contribute to back injuries. Each Microcleanze pad can be washed up to 300 times. To wash your Microcleanze products follow the instructions on the care tag.
-
Add to cart
The PROMOP HYPER-DRI 20 MICROCLEANZE PAD REPLACEMENT
The Hyper-Dri Microcleanze pad is a high performance polyester/polyamide fabric that is used under the base of all Hyper-Dri mops to remove wet spots on your floor surface during competion. Microcleanze fabric can hold up to six times its weight in fluid. Picks up 10 times more dust, grit and dirt, and removes 70% more bacteria compared to cotton. Research has shown that mopping with Microcleanze fabric reduces heavy lifting and problematic body positions that can contribute to back injuries. Each Microcleanze pad can be washed up to 300 times. To wash your Microcleanze products follow the instructions on the care tag.
-
Add to cart
The PROMOP HYPER-DRI 20XL MICROCLEANZE PAD REPLACEMENT
The Hyper-Dri Microcleanze pad is a high performance polyester/polyamide fabric that is used under the base of all Hyper-Dri mops to remove wet spots on your floor surface during competion. Microcleanze fabric can hold up to six times its weight in fluid. Picks up 10 times more dust, grit and dirt, and removes 70% more bacteria compared to cotton. Research has shown that mopping with Microcleanze fabric reduces heavy lifting and problematic body positions that can contribute to back injuries. Each Microcleanze pad can be washed up to 300 times. To wash your Microcleanze products follow the instructions on the care tag.
-
Add to cart
The PROMOP HYPER-DRI 28 MICROCLEANZE PAD REPLACEMENT
The Hyper-Dri Microcleanze pad is a high performance polyester/polyamide fabric that is used under the base of all Hyper-Dri mops to remove wet spots on your floor surface during competion. Microcleanze fabric can hold up to six times its weight in fluid. Picks up 10 times more dust, grit and dirt, and removes 70% more bacteria compared to cotton. Research has shown that mopping with Microcleanze fabric reduces heavy lifting and problematic body positions that can contribute to back injuries. Each Microcleanze pad can be washed up to 300 times. To wash your Microcleanze products follow the instructions on the care tag.
-
Add to cart
The PROMOP HYPER-DRI 28XL MICROCLEANZE PAD REPLACEMENT
The Hyper-Dri Microcleanze pad is a high performance polyester/polyamide fabric that is used under the base of all Hyper-Dri mops to remove wet spots on your floor surface during competion. Microcleanze fabric can hold up to six times its weight in fluid. Picks up 10 times more dust, grit and dirt, and removes 70% more bacteria compared to cotton. Research has shown that mopping with Microcleanze fabric reduces heavy lifting and problematic body positions that can contribute to back injuries. Each Microcleanze pad can be washed up to 300 times. To wash your Microcleanze products follow the instructions on the care tag.
-
Add to cart
COURTDECAL™ PREP – 32 OUNCE SPRAYER
A professional cleaning solution used to prepare the surface of your basketball court floor prior to installation of vinyl floor graphics. It removes surface contaminates such as oily residues, perspiration, and grease to ensure your vinyl decal adheres properly. It can be used on floors with waterborne or oil-modified coatings. It will not damage your surface. COURTDECAL™ PREP should also be used to clean your vinyl decal prior applying a coat of COURTDECAL™ GUARD – a non-slip, protective coating, which is required by the NCAA to keep your basketball surface consistent.
New NCAA Basketball Rules requires decals to be “of a consistent surface”:
The NCAA Playing Rules Oversight Panel recently approved a rule change that requires temporary decals and logos placed on the court to be “of a consistent surface” as the rest of the floor.
-
COURTDECAL GUARD – 1 QUART
$35.00Add to cartCOURTDECAL™ GUARD – 1 quart. Coverage – approximately 125 square feet per quart (1 coat)
A glossy, slip-resistant, protective decal coating that was engineered to be consistent with your existing waterborne or oil modified hardwood sport floor finish. It is a liquid clear coat that is applied over your vinyl floor decal. COURTDECAL™ Guard dries quickly and is ready to play on after 6-8 hours of dry time!
New NCAA Basketball Rules requires decals to be “of a consistent surface”:
The NCAA Playing Rules Oversight Panel recently approved a rule change that requires temporary decals and logos placed on the court to be “of a consistent surface” as the rest of the floor.